Kona Dream Builds: Double Impact Naoki Idegawa’s Process 153 CR DL 27.5

Japanese Kona rider Naoki Idegawa’s Process 27.5 CR DL pulls double duty as both an enduro race bike and a lightweight DH rig. The bike is well and truly dreamy in both configurations. His motivation for building the DH version? Well, some of the short courses on Japan’s DH circuit don’t really warrant a full DH bike so Naoki transforms his Process to DH mode for the occasional race.

This is the Process in DH Guise. Magic Mary’s mounted up on Mavic Deemax hoops with a full XTR/Saint groupset and no dropper post.
Outback he’s opted for a short cage Saint rear mech and a DH cassette. The rear damping is looked after by the ever-popular Fox Float X2 Factory rear shock.
SDG’s Sam Hill pro-model seat is attached to the rigid post. Up front, Naoki is rocking a 35mm Renthal Carbon Fatbar mounted to an Apex stem.
Fox Factory 36’s to match the Float rear.

Now, these little green bolts attached to the Saint brakes and shifter are Ti, Naoki has a thing for Ti bolts as you are about to see.
Saint calipers and floating Shimano rotors… and Ti bolts.
More Ti Bolts.
Cane Creeks deluxe 110 headset and… More Ti Bolts.
Even the XTR cranks didn’t escape the ti bolt retrofitting.

On Enduro days, the wheels are swapped out for a set with Minions front and rear and a wider range cassette. The derailleur is upgraded to an XTR version and the rigid post gets swapped out for a Fox Transfer post.
Japenese riders (and all those who drive on the left side of the road) love the ability to run the rear brake line on the right of the frame, clean cable routing is important when building a dream bike.