Today’s Dream Build comes from fresh Kona Ambassador Heiko Krause who hails from Smithers, BC. Heiko loves all the bikes, today though we are going to take a look at his buzzy Process X CR DL.  

The drivetrain is a mix of Race Face and SRAM. A set of Next R carbon cranks is wrapped in a SRAM oil slick XX1 chain…

… which is connected to a SRAM XO1 AXS Red 12 speed rear derailleur and XX1 cassette.

Suspension is a little different to what we normally see here, out the back you’ll find an Ohlins TTX22M Coil shock while up the front the build is rocking a matching 170mm Ohlins RXF36 M.2 Air.

Some Sensus Lite grips keep one set of contact points attached to the bike, the grips are mounted to a Race Face Next R 20mm rise bar which is held in place with a 35mm Race Face Turbine stem. A OneUp Components EDC tool completes things up front. 

Clean. Thanks in part to that Cane Creek 110 headset.

The build is rounded out with a set of We Are One Union carbon hoops wrapped in Maxxis rubber, an Assegai up front and a Minion DHF out the back. And a Race Face Turbine R 175mm dropper post finishes it all off.